Specification
|
Interfaces
|
8*10/100Mbps POE ports(Data/Power)
2*10/100M uplink RJ45 ports (Data)
|
Main functions
|
Follow IEEE 802.3 Ethernet and IEEE802.3u Fast Ethernet Protocol
Supports POE IEEE 802. 3af/at compliant Powered Device (PD)
Store-and-forward switching scheme
Support IEEE802.3X full duplex and Backpressure half duplex
MAC address auto-learning & auto-aging
|
Standards
|
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3i 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3af/at, Power over Ethernet
IEEE 802.3x Flow Control
|
Modes
|
Normal switch mode/Extend mode
|
Transfer rate
|
Etherent: 10Mbps (Half-duplex); 20Mbps (Full-duplex)
Fast Entherent: 100Mbps (Half-duplex); 200Mbps (Full-duplex)
|
Store & Forwarding
|
Yes
|
Switching Capacity
|
2G
|
MAC Address
Table Size
|
2048
|
Jumbo Frame
|
2048 byte
|
Operating parameters
|
Operation Temperature:0℃~40℃
Storage Temperature:-40℃~70℃
Operation Humidity:10%~90% RH Non-condensing
Storage Humidity:5%~90% RH Non-condensing
|
Power Input POE
Standards
|
The maximum power of one port is 30W,
PoE budget 120W
Support over-current,over-voltage and short-circuit protection
Support Soft Start of High Power PD
Support sequential boot-up
Power Supply Pin:12+/36-
AC 110~240V 50/60HZ
|
Types of cables
|
100Base-TX: Cat 5e or better UTP/STP(≤100m)
10Base-TX: Cat 5e or better UTP/STP(≤250m)
|
Dimensions
(L x W x H )
|
190mm*140mm*43mm
|